Regardless of whether you’re one of the experienced fishermen or beginner anglers, how would you feel if a tarpon or redfish managed to escape your trap, spooling all the braids you had? It will happen if you have no sufficient yards of lines on the fishing reel. Again, leaving large yards of lines can put you in a lot of troubles, such as wind knot or line twisting.
So, how much braided line to put on a spinning reel? It would be best to keep balancing while spooling the braided fishing line on a spinning reel. Most braids are sold with a 150-yard spool where the smallest spinning reel can hold much more than that. Here, what you can do is adding some yards of backing lines along with the braids.
Why should you do this? How much different line is exactly to put? And how can you add multiple types of lines on your reel?
Maybe, these questions are wondering to you, right? No worries, as this article will erase all your confusion. Also, there is some information mentioned here that’s you need to know as a serious angler.
How Much Braided Line Should I Put on a Spinning Reel?
A simple answer to this will be – put the line on how much your reel size supports it.
However, you shouldn’t overfill the spool as it leaves a chance to jump out the line its place. Also, it will absorb water and take up space or get more brittle. Try it fill, keeping the line below the tip.
Here, the usual fill level is 1/6 below the lip of the spool. Experienced anglers, though, keep it more a little as their measurement.
Now, how much to put in?
Though most reels will recommend you put on them around 200 yards of line, some problems will arise here.
You know, the spinning reels, even a pretty small one, 2500 reel, for example, can hold approximately 240 yards of braid.
Then how would you fill the rest space if you have 150 yards of the entire braided line?
Here’s a solution to add extra monofilament backing lines with the braided line. You’re probably wondering – why am I talking about the monoline instead of an additional braided line?
See the reason why –
Braid tends to free spin on the reel spool automatically and makes you totally busted. And a monofilament backing can grip it better, plus it’s cheaper than the braided.
Now, you have caught this point that you need to put a backing line first, and then the rest space is to fill up with the braid.
This also leaves a piece of confusion, doesn’t it?
Yes, now the question arises- how much mono you should adjust at first, as there is a chance to leaving less space for the braided to add?
Well, you can make the ration by doing some simple mathematics. Say the reel you have can hold 240 yards and you have 150 yards of braided; here you can add 80-90 yards of mono.
But if you want the perfect ratio, there a superb technique you can follow. All you need for this
- The rod
- Two same-sized reels
- Braided line
Now, the steps are here; see how to spool a spinning reel with braid.
- Take one of the spinning reels and grip it with the braided line you have. Put 100-150 yards or a few more of it.
- Tie the end of the braid with the mono and then fill the rest of the spool up.
- Replace the griped reel with the empty one in the rod and then transfer the lines onto it. This transferring will put the braided line on the top.
Thus, now you have the right amount of mono below the braided line you need as much. Now, can you use a braided line on a spinning reel? You know the answer, right?
Note: This Spinning Reel is available on the Amazon website, see their current price by clicking here.
How Much Line to Put on a Trolling Reel?
You can’t apply the same strategies while spooling lines to a trolling reel as it for the spinning one. It’s because of considering the tasks a trolling line asked to perform as it’s mainly a deep-sea reel.
You should choose a sinking line for your trolling reel as a copper or lead core line, as the braid.
But here, it would better to use a suitable mono with the braided line if your spin doesn’t come with a rubber. Try to put 10 – 20 yards of these baking before adding a braided line.
Now, how much line does it hold?
Depending on the reel’s size, a trolling one can have 100 – 300 yards of any types of sinking lines. A 45 series reel can hold only 150 feet copper line with a suitable amount of backing lines.
Here, the 55 series trolling reels is the best option for all offshore reeling as it holds lots of backing lines along with 300 feet spool of copper line or lead core line.
While choosing a trolling reel, you should try one, having high lines holding capacity; thus, it can easily cover the depth both horizontally and vertically with the troller speed.
Note: click here for the price
How Much Line to Put on a Baitcasting Reel?
Nowadays, the Baitcast reel is pretty much popular though its controlling would seem more challenging if you are a beginner angler.
However, when it comes to spooling the line, it’s much more comfortable than the others reels’ as for the spinning one.
While choosing a line, you should consider the line type and size as it’s for the others reel.
If you choose a thicker line, say the 20-pound test; it would let you spooling a lesser line that what it can hold. So, it’s better to choose a thinner line for a Baitcasting reel.
Here, you can try a 10-pound test line; thus, it would leave more significant space for holding more yards.
As for the line types, you can use monofilament or fluorocarbon line directly to spool, but you know, a braid provides less memory and stretch than the others.
In this case, you should tie a backing line with the braid to get the best result. Got it, right?
While spooling, always keep in mind that you should grip the yards with maximum tension onto the spool so that you can avoid the loop forming.
You can do this here: passing the lines through the rod guides and completing an arbor knot using an overhand one at first.
How much to put?
Spool the lines until it leaves a space one-eighth of an inch from the top of the spool’s lip.
If you are interested this is the latest price for this Baitcasting Reel ( this link takes you to the Amazon.com website)
How Much Line to Put on a Surf Fishing Reel?
With a surf reel, you can fish on a sandbar.
A sandbar?! Well, it’s the zone where the sea waves break and form a white appearing, and lots of fishes are used to hide in this zone.
But, finding the bites of these is possible when your reel has enough lines to reach in different sandbars zone.
While casting in sandbars, you need to use a double max casting distance, as the rest of the lines is better to leave on the spool.
However, if you want to fish from the 3rd sandbar, it needs to cover 170 – 200 yards distance; pretty much harder to reach; isn’t it? But you can quickly get to the 2nd sandbar by your surf reel with a 150 yards line.
So, is 150 yards enough? No, what about the rest of the lines that you should leave on the spool?
Overall, you need to put more than 200 yards line on your reel where 100 – 150 yards will cover the sandbar distance, and rests will remain on the spool.
How Much Braid to Put on a 2500 Spinning Reel?
What’s the holding capacity of your spinning reel?
If your 2500 series reel can hold 10 pounds of lines, that means its more than enough for a braid of 150 yards.
A braided line with 100 to 150 yards covers only 4 – 6 ponds where a mono of 109 yards can fully fill-up the spool with 10 lbs. of capacity.
Now, you can notice the differences. You need a braided line at least 240 yards to cover a 2500 spinning reel. So, what do you think; can you use a braided line on a spinning reel?
Obviously! But you shouldn’t put it alone. Why? You already have known!
A spinning reel is not perfect for a straight use of braid line as it doesn’t come with rubber, and you know, a braid can’t be fixed in it properly.
Also, it will spin automatically. So, you need a backing line to put on the reel first and then add the braided line with it.
The perfect technique to put a braid along with the mono, you have read already, haven’t you?
Note: both bass fishing and offshore fishing need line and reel, as you have already required for other types of fishing methods.
Can You Put Heavier Line on a Reel?
What do you expect from your fishing reel? If it’s that to put a large yard of lines, our suggestion would be – Don’t go for a heavier line. Why?
A more massive line is much thicker in diameter, and a few yards of it can fill a large of space. And, thus, you can’t put a large amount of line on your reel.
So, putting a heavier line on a fishing reel can enhance the chance of wind knot.
Some heavier lines are fluorocarbon and monofilament lines, which come with large enough diameters.
When you use these lines, there is a chance for the spooled yards to jump from the reel.
Also, you can’t maintain the proper distance between the gripped lines with the spool’s lip. It would be higher than 1/8 of an inch if you want to make your line a little yards more.
But yes, when you don’t need to cover a massive depth to fish, you can use a mono backing or fluorocarbon line for your fishing reel.
Still, if you have a heavier line to use, you have to manage a sturdier, bigger reel that can hold your line pretty well to catch massive, saltwater fish.
How Do You Spool Fishing Line on a Reel?
Well, how to spool braided line on a reel? Depending on the types of reels, you need to go for a different procedure while spooling it.
If you have a spinning tool, take it, attach it to the rod and then follow the steps.
- Open the bail at first. Here needs to mention that most of the people do forget to open bail before spooling and face trouble as it needs to back this step.
- Run the end of the line you are using, through the first guide towards the reel.
- Tie the line edge with the spool. It’s pretty straight forward, you know. Thus you can adjust some old lines before and then tie the old line with the new one.
- Close the bail and start winding the line slowly by turning the handle. Must ensure the line spool movement if it’s in the right direction or not.
- Now, continue spooling the lines and keep going until they fill up the reels.
#Tips; if you might not face trouble
- Ensure the proper tension between the yards and spool.
- Keep pressing your finger on the line under the rod where it’s introducing with the reel. It will prevent losing line.
- You can hold the rod parallel to the floor and quickly can notice the direction of the spooling. Don’t fill the whole space of your spool.
- Make sure there is at least a gap of one-eighth of an inch to reach the lip. And it’s the perfect solution while spooling line in any fishing reel.
Hopefully, this article has covered all about “how much line to put on a reel” that you’re looking for.
In a nutshell, always notice the reel and line capacity, what it can hold, and the line type and size that would be perfect for your spinning gear.
If you’re trying to put too much extra line on a spinning reel, it will increase the chance of wind knots or line twisting.
Make sure you’re putting quality lines on your spinning reel.
Typically, an expensive line has more features and benefits than a cheap line. Although it needs a bit more bucks at once, this helps you to save money in the long run of fishing.