How To Anchor A Gun Safe To A Wall? (7 Easy Step)

We have all heard the stories of people who have lost their entire gun safes because they were not securely mounted in the first place. Therefore, if you are planning to buy a safe for your guns, it is important to know whether or not you can anchor it to the wall.

A gun safe bolted to the wall is more difficult to steal than one that is not bolted down. Thieves are less likely to break into a safe that is bolted down or anchored to a wall.

Anchoring the gun safe securely to the wall also prevents it from being tipped over by anyone who would try to break in. That is why you will see a lot of the safes on the market come with pre-drilled holes.

How To Anchor A Gun Safe To A Wall?

It is not necessary to bolt down a gun safe if you can secure it another way, but it is still one of the most common ways to secure it. So, if you want to learn how to anchor a gun safe to a wall, you are in the right place.

Related Post: How To Build A Gun Safe In A Closet? (7 Easy Step By Guide)

Can You Anchor A Gun Safe To The Wall?

There are a lot of different types of gun safes on the market. Some safes come with holes on the back pre-drilled for bolting them down, but you will need to find the right drill bit set and drill in order to anchor your safe to the wall.

You’ll also need a drill or screwdriver with an extension, as well as some lag bolts and washers. Also, it’s not worth buying a gun safe that doesn’t have any option to mount it down.

Step By Step Guide On Bolting Down A Gun Safe To A Wall

The following section is a guide on how to anchor a gun safe to a wall. It will give you all the necessary information that you need to know on how to do this. So, without further ado, let’s dive right in.

Step By Step Guide On Bolting Down A Gun Safe To A Wall

Step 1: Choose The Right Safe

Before you decide on which safe to buy, you will need to plan ahead and think of the location where you will be placing the safe. Different types of safes offer different mounting options.

If you want a gun safe that can be mounted on the floor, then you will need to purchase a floor safe. If you want one that can be mounted on the wall, then you will need to purchase a wall-mountable safe.

Step 2: Picking The Right Spot

Next, you will need to decide where you want it located in your house. This will be based on factors such as where do you spend most of your time, what type of room it should be placed in, and the size of the room.

The best place to anchor the gun safe is the corner of a room, preferably near a door. This way, it will be easier to get to the safe in case of an emergency. Also, consider the weight of the safe.

If it weighs a lot, then you will need to anchor it to a stud or a wall that can support its weight. Another consideration is the height from the ground. If you have children, it would be best to have your safe placed at eye level so they cannot reach it and be tempted to play with it.

Step 3: Consider The Type Of Wall You Have

Mounting a gun safe on a wall is not as easy as it seems. You need to know about the type of wall you are planning to mount the safe. You also need to know the type of material the wall is made out of and how it is constructed. Then you need to decide what type of anchors will work best.

Some walls are made from concrete, brick, or cinder blocks which usually require the use of heavy-duty anchors that you can screw easily into the concrete wall. Other walls may be made of drywall or plaster, which can only support lighter-weight anchors nailed into the wall.

The installation process can vary depending on what type of anchor you use. Screws, for example, need to go into the gun safe, and the size of the hole in it will need to be accurate according to your anchor screw size.

Step 4: Finding The Studs

The next thing you will need to do is find the studs in the wall. There are a few ways to do this. You can use a stud finder, use a small piece of paper, hold it up to the wall, or tap on the wall with your knuckles and then listen for a hollow echo.

Once you have found the studs on your wall, mark them with a pencil and measure how far apart they are from one another. The distance between each one should be 24 inches on the center.

Step 5: Keep Enough Space Behind The Safe

Next, ensure that you have enough space behind the safe for all of your cables and wiring. Then measure from where you will be installing the safe to where these wires could come out of your home’s electrical system without being seen by someone outside of it.

Step 6: Align The Safe With The Drilled Holes

Anchoring a gun safe is not an easy task. First, you have to locate the right spot and then drill holes into the concrete or wall to go through the lag or anchor bolts. The only downside is that you have to align all of this before you can start drilling, which can be difficult if you’re not an expert on how things work.

To ensure the gun safe is level, make sure the floor is level before you start. The carpenter’s level can be used to check the level of the gun safe. Using shims will help you level the safe if it isn’t level.

Step 7: Mounting The Safe

You should mount the safe using a power drill after locating the studs and placing the bolts. Then, you just need to make sure the screws are tightly and securely inserted into the safe. The safe should come with its own mounting hardware.

The bolt should be inserted into the hole in the wall with the washer attached. Use a socket wrench or pliers to tighten the hex nut.

The process will become easier if there are pre-drilled holes on the back of the safe. If not, you will have to carefully drill holes which is too risky to do on your own. Contact a safe installer if you don’t feel confident enough.

The risk of accidents increases if you are restricted to one hand. If you plan to install a wall-mounted safe, you might find it helpful to hire some help.

It will be somewhat difficult to hold it level, drill holes, and insert the screws or bolts if you try to do it all on your own. The task can be accomplished more quickly and efficiently in a safer environment with the help of someone.

Closing Thoughts

Bolting a safe to the wall is more difficult than anchoring it to the floor. That is why we always recommend you hire a professional to install your gun safe for you. This will ensure that it stays bolted in place and doesn’t fall down when someone tries to break it open.

1 thought on “How To Anchor A Gun Safe To A Wall? (7 Easy Step)”

Leave a Comment